Penguin mascot
Calculators

Square Footage Calculator

Flooring, paint, tile, turf — everything is sold by the square foot, and guessing wrong is expensive in both directions. Measure your rooms, add them up here, and add a material price if you want the damage estimate too.

Enter a room's length and width, then hit Add room. Add as many rooms as you like — the total updates as you go.

How to use

  1. Measure the room. Tape measure along the floor, wall to wall, at the widest points. For feet-and-inches measurements, convert inches to a decimal (6 inches = 0.5 ft) or use meters.
  2. Enter length and width and hit "Add room." Each room lands in the list with its own area.
  3. Repeat for every room — the running total shows square feet and square meters together.
  4. Buying materials? Enter a cost per square foot and the estimate includes a total with a 10% waste allowance — the overage every flooring installer will tell you to buy anyway.

Measuring rooms that aren't rectangles

Most rooms are rectangles, and for those the math is just length × width. Real houses, though, come with L-shaped living rooms, bay windows, alcoves, and closets that jut in and out. The fix is always the same: break the odd shape into rectangles, measure each one, add each as its own "room" here, and let the total do the adding. An L-shaped room becomes a big rectangle plus a small one. A bay window becomes a shallow rectangle across the front. A closet bump-out you don't want floored gets measured and subtracted at the end.

For flooring, tile, and carpet, buy more than the exact number. Cuts, mistakes, pattern matching, and the occasional board that arrives warped all eat material, and running one box short mid-job — with your exact product suddenly back-ordered — is a special kind of misery. The standard allowance is 10% extra for planks and tile laid straight, 15% for diagonal layouts or patterned tile. This calculator applies a 10% waste factor to the cost estimate whenever you enter a material price; bump your order manually if your layout is fancy.

Paint is the other classic use. Walls aren't floors, but the trick is simple: for each wall, width × ceiling height is its square footage, and you add walls just like rooms. Subtract roughly 20 sq ft per door and 15 per standard window if you want to be precise, then check the paint can's coverage rate (usually 350–400 sq ft per gallon per coat) and remember that two coats is the norm, not the exception.

One conversion worth memorizing: 1 square meter is about 10.764 square feet. Listings outside the US, imported flooring, and most of the world's tile are sized in metric — this calculator shows both units on every result so you never have to care which one the box is printed in.

Frequently asked questions

How do I calculate square footage?

Measure the length and width of the space in feet and multiply them: length × width = square feet. A 12 ft × 10 ft room is 120 sq ft. For irregular rooms, split the space into rectangles, calculate each, and add them together.

How do I handle feet and inches?

Convert the inches to a decimal of a foot: divide inches by 12. So 10 ft 6 in is 10.5 ft, and 3 inches is 0.25 ft. Enter the decimal values and the calculator handles the rest.

How much extra material should I buy?

Plan on 10% extra for standard flooring and tile, 15% for diagonal or patterned layouts. The cost estimate here includes a 10% waste allowance automatically when you enter a price per square foot.

How do I measure an L-shaped room?

Divide it into two rectangles, measure each one separately, and add both as rooms. The combined total is your square footage — no special formula needed.

How do I convert square feet to square meters?

Divide square feet by 10.764 (or multiply square meters by 10.764 to go the other way). Every result on this page shows both units, so you don't have to convert by hand.

Related tools

Keep the momentum going.